Decker Electric has been handling residential and commercial electrical work in Anchorage since 2015, and in that time we have built a reputation for showing up on time, diagnosing problems accurately, and finishing the job cleanly. Whether you need a single outlet replaced, a full panel upgrade, or a generator wired before the next winter storm, we cover it all. Same-day availability, transparent pricing with no hidden fees on any wiring job, and work performed by licensed electricians on every call. Call (907) 615-8798 for a quote.
Same-day service. Upfront pricing. Licensed electricians.
Most homeowners can't tell a minor wiring issue from a serious one, and that uncertainty is exactly why a fast, honest diagnosis matters. Flickering lights, dead outlets, tripping breakers, and circuits that won't reset are all signs that something needs attention. Some are simple fixes. Others point to a deeper wiring problem that only gets worse if ignored.
When we arrive, we start at the source. We check the panel, test the circuit, and trace the fault before we recommend anything. GFCI outlet repair and replacement, circuit breaker repair, and outlet installation are among the most common calls we handle, and most of them are resolved in a single visit.
One call brings an electrician to your door.
Some homes need a full rewire. Others just need one outlet fixed. We handle both ends of that spectrum and everything in between.
Standard outlet installation, GFCI outlets in kitchens and bathrooms, USB outlets for modern convenience, dimmer switch installation, and light switch replacement are all straightforward jobs that make a real difference in how a home functions day to day. For landlords and property managers, keeping outlets and switches in good working order reduces tenant complaints and keeps the unit code-compliant.
We give honest recommendations on repairs, never an upsell. If a switch swap is all you need, that is what we will tell you.
Pick up the phone and we'll get rolling.
Older homes in Anchorage were wired for a different era. When a 100-amp panel is trying to carry electric heat loads, modern appliances, and everything else a household runs today, the system is working harder than it was designed to.
We handle breaker panel repair, 200-amp panel upgrades, service panel replacement, and subpanel installation. Before any panel work begins, we run a load calculation to make sure the new service is sized correctly for your home or building. Code-compliant wiring, proper grounding and bonding, and a clean service entrance are standard on every panel job we do.
Whether you are upgrading an aging system or adding capacity for a renovation, getting the panel right is the foundation for everything else.
Reach out and we'll start at the panel.
Whether it's a single outlet or a full panel upgrade, the wiring behind the walls determines how safe and reliable everything else is. Homes built decades ago sometimes still have knob-and-tube wiring or aluminum branch wiring, both of which carry real risk and limit what you can safely add to the system.
We handle whole-home rewiring, knob-and-tube replacement, and aluminum wiring remediation. For additions, finished basements, and new appliances, we install dedicated circuits sized for the load. A dryer, refrigerator, or other high-draw appliance needs its own circuit to run safely and efficiently. We also run new circuits for garage and block-heater outlets, which are a practical necessity for anyone parking a vehicle in Anchorage through the winter.
The wiring done right the first time means fewer problems down the road.
One call brings an electrician to your door.
When the job is done, we leave your home clean and powered, and that includes lighting that actually works the way you want it to.
We install recessed lighting, LED lighting, under-cabinet lighting, chandeliers, and pendant fixtures. Ceiling fan installation and ceiling fan wiring are common requests, especially for homes adding a new room or replacing an old unit. Exhaust fan installation and bathroom fan installation round out the interior work.
Outside, we handle security lighting, motion sensor lights, flood lights, and porch lights. Good outdoor lighting matters year-round in Alaska, where darkness sets in early and conditions can be icy. We run the wiring correctly, mount the fixture securely, and make sure everything is weatherproofed for the climate.
Pick up the phone and we'll get rolling.
Electrical work in Anchorage is shaped by the environment. Long sub-freezing winters, ice storms, heavy snow loads, and the occasional multi-day outage create demands that simply do not exist in milder climates. The three services below come up constantly in this area, and we handle all of them with the same attention to detail we bring to every job.
When a storm knocks out power in January and temperatures drop fast, a whole-home generator is not a luxury. It is what keeps the heat running and the pipes from freezing. We handle the electrical side of generator installation from start to finish: generator wiring, transfer switch installation, and panel connection. A properly installed automatic transfer switch means the generator takes over without any action on your part. We work with standby generator hookups and portable generator connections, and we make sure the installation meets code before we leave.
Reach out and we'll start at the panel.
Electric heat loads are punishing on an undersized panel. Add a block heater circuit, a dryer, a chest freezer, and the rest of a modern household, and an older 100-amp service runs out of room quickly. We upgrade service entrances to 200-amp capacity, install new panels, and run load calculations to confirm the system can carry what the home demands through a full Alaska winter. Anchorage has a significant share of older housing stock, and panel upgrades are one of the most common calls we handle.
One call brings an electrician to your door.
Frozen pipes and roof ice dams are routine winter risks in this area, and heat tape is one of the most effective ways to prevent them. The electrical side of a heat tape installation matters as much as the tape itself. A dedicated circuit, correct wiring, and a proper connection to the panel keep the system running safely without overloading the circuit or creating a fire hazard. We install the circuit and make the connection correctly so the heat tape does its job without creating a new problem.
Choosing the right electrical fix is easier than it sounds, and the same is true for choosing the right charger setup. A Level 2 EV charger installation requires a dedicated 240-volt circuit, and we handle the full job: running the circuit, installing the outlet or hardwired unit, and confirming the panel has the capacity to support it. We work with all vehicle types, including Tesla chargers and standard EV charging stations.
Whole-home surge protection is a separate but equally practical investment. A single voltage spike from a storm or a utility event can damage electronics, appliances, and the wiring itself. A surge protector installed at the panel guards the entire home rather than just the outlets where individual strips are plugged in. For homes with high-value appliances or sensitive electronics, it is a straightforward way to protect what you have already paid for.
Pick up the phone and we'll get rolling.
An electrical safety inspection covers the panel, the wiring, the outlets, the grounding, and the protection devices throughout the home. We check for AFCI and GFCI protection where code requires it, test arc-fault breakers, and look for signs of deteriorating wiring or overloaded circuits. If you are buying a home, selling one, or have not had the system looked at in years, an inspection gives you a clear picture of where things stand.
We also install hard-wired smoke detectors and carbon monoxide detectors as part of a safety-first visit. In a climate where homes run heating equipment hard for months at a time, having properly installed detectors is not optional.
We answer our own phones and show up in our own trucks. When you call, you reach someone who knows the area and can schedule a visit that works for you.
Reach out and we'll start at the panel.
We work with business owners, property managers, and commercial tenants across Anchorage. Office electrical work, retail buildouts, restaurant electrical, warehouse circuits, and tenant improvement wiring are all within our scope. Commercial panel upgrades, new circuit installation for equipment, and commercial wiring for renovations are handled with the same care we bring to residential jobs.
If you manage a property or operate a business and need a reliable electrical contractor who shows up and gets the work done, we are the call to make.
One call brings an electrician to your door.
Whether it's a single outlet or a full panel upgrade, you deserve to know what the job will cost before work begins. We provide an honest estimate upfront and stick to it. Transparent pricing with no hidden fees on any wiring job is how we operate, and that applies to same-day calls and after-hours work as well.
If you have an electrical problem today, call today. We keep availability open for same-day service calls because problems rarely wait for a convenient time.
Same-day service. Upfront pricing. Licensed electricians.
We serve customers throughout Anchorage and the surrounding communities within the municipality, including Eagle River, Chugiak, Peters Creek, Birchwood, Girdwood, Turnagain, Spenard, and the neighborhoods near Joint Base Elmendorf-Richardson. Whether you are in a midtown condo, a hillside home, or a commercial property on the outskirts of the municipality, we make the drive.
If you are not sure whether we cover your area, just call. Chances are good we do.
We keep availability open for same-day service calls throughout Anchorage and the surrounding Municipality. If you call during our operating hours, which run every day from 5:30 AM to 10:30 PM, we will tell you honestly what we have available and when we can be there. For urgent problems like a tripping breaker or a dead circuit, call (907) 615-8798 and we will do our best to get someone out the same day.
We serve customers throughout Anchorage Municipality, including Eagle River, Chugiak, Peters Creek, Birchwood, Girdwood, Turnagain, Spenard, and neighborhoods near Joint Base Elmendorf-Richardson. If you are not sure whether we reach your address, call (907) 615-8798 and we will let you know quickly. Chances are good we cover your area.
Yes. We work with homeowners, landlords, property managers, and commercial clients including offices, retail spaces, restaurants, and warehouses. The scope of work varies, but the approach is the same on every job: show up prepared, do the work correctly, and communicate clearly about what we found and what we did.
When you call, you reach someone who knows the area and can talk through what you are describing. We will ask a few questions about the problem, give you an honest sense of what it might involve, and schedule a visit that works for your day. When we arrive, we assess the situation, explain what we found, and give you a clear price before any work begins.
We give you a clear price before any work starts and we stick to it. If something unexpected comes up once we are into the job, we tell you before we proceed, not after. There are no surprise line items on the invoice and no fees added at the end without your approval.
Start by checking your breaker panel for any tripped breakers and reset any that are in the middle position. If nothing is tripped or the breaker trips again immediately, do not keep resetting it. That pattern usually points to a wiring fault or an overloaded circuit that needs a professional diagnosis. Call (907) 615-8798 and we can walk you through next steps or schedule a same-day visit.
Someone over the age of 18 should be present for the visit, both to provide access to the panel and areas that need work and to review the estimate before we begin. If your schedule is tight, let us know when you call and we will do our best to find a time that works. We run appointments every day from 5:30 AM to 10:30 PM, which gives us flexibility that a standard nine-to-five window does not.
Payment is due when the job is complete. We review the work with you before we collect, so you have a chance to ask questions and confirm everything was done as discussed. We do not collect payment before the work is finished.
Decker Electric is ready to take your call. Whether the job is a tripped breaker, a panel upgrade, a generator hookup, or a full rewire, we will give you an honest estimate and schedule a time that works. Work is performed by licensed electricians, pricing is upfront, and we stand behind what we do.
Call (907) 615-8798 today and let's get your electrical work on the schedule.
Power restored. Code-compliant. Done right.
From a tripped breaker to a full panel upgrade, we handle the electrical work that keeps Anchorage homes and businesses running safely through every season. The table below covers the services we offer most often, who each one is best suited for, and a practical note to help you decide what to schedule first. If you have questions about a specific job, call us and we will talk it through.
| Service Type | What the Job Involves | When You Need It | Worth Knowing |
|---|---|---|---|
| Breaker & Fuse Repair | breaker replacement, fuse panel service, circuit reset diagnosis, overload assessment | Homes where a breaker trips repeatedly or will not hold a reset | A breaker that trips again immediately after reset usually signals a wiring fault, not just an overload |
| Electrical Panel & Service Upgrades | 200-amp service upgrade, panel replacement, subpanel installation, load calculation | Homes with electric heat loads, older 100-amp panels, or any property adding significant new circuits | A load calculation before the upgrade confirms the new service is correctly sized for the home's actual demand |
| Dedicated Appliance Circuits | dryer and range circuits, refrigerator and freezer circuits, workshop circuit installation | Anyone adding a high-draw appliance that needs its own protected circuit | Running a dryer or large appliance on a shared circuit causes nuisance trips and can shorten the appliance's life |
| Electrical Safety Inspections | panel and wiring inspection, AFCI and GFCI testing, grounding and bonding check, pre-sale or pre-purchase review | Home buyers, sellers, and anyone who has not had the electrical system reviewed in several years | An inspection gives you a clear picture of what is safe, what is marginal, and what needs attention before it becomes urgent |
| Ceiling Fan Installation | fan mounting and wiring, new ceiling box installation, fan switch or remote setup | Homeowners adding a fan to a new room or replacing an older unit | Older boxes may not be rated for fan weight; we check and replace the box when needed |
| Garage & Block-Heater Circuits | block heater outlet installation, dedicated garage circuits, weatherproof outlet wiring | Anchorage vehicle owners who need reliable plug-in access through winter | Block heater outlets are a practical necessity here; a dedicated circuit prevents nuisance trips on cold mornings |
| Outlet & Switch Installation | standard outlet replacement, GFCI outlet installation, USB outlets, dimmer and switch upgrades | Homeowners, landlords, and property managers keeping units code-compliant and functional | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor locations |
| Electrical Repairs & Troubleshooting | flickering lights, dead outlets, tripping breakers, circuit fault diagnosis | Any homeowner or tenant dealing with an unexplained electrical problem | Most common faults are resolved in a single visit once the source is correctly identified |
| Lighting Installation | recessed and LED lighting, security and motion lights, outdoor fixture wiring, under-cabinet lighting | Homeowners upgrading interior lighting or adding outdoor security lighting for Alaska's long dark winters | Outdoor fixtures in this climate must be weatherproofed and properly sealed against moisture and cold |
| Whole-Home Surge Protection | panel-level surge protector installation, whole-home electronics protection | Homes with high-value appliances, electronics, or sensitive equipment vulnerable to voltage spikes | A panel-mounted protector guards every circuit in the home, not just the outlets with power strips plugged in |
| Backup Generator Installation | transfer switch installation, generator wiring, panel connection, standby and portable hookups | Anchorage homeowners who need heat, lights, and essential circuits to stay on during winter outages | An automatic transfer switch takes over without any action on your part when utility power drops |
| Wiring & Rewiring | whole-home rewiring, knob-and-tube replacement, aluminum wiring remediation, addition and basement wiring | Older homes with outdated or unsafe wiring that limits what can safely be added to the system | Knob-and-tube and aluminum branch wiring carry real safety risks and often affect homeowner insurance coverage |
| Heat Tape Installation | dedicated circuit for heat tape, safe panel connection, roof and pipe heat tape wiring | Homeowners preventing frozen pipes or roof ice dams through Alaska's sub-freezing winters | Heat tape requires its own dedicated circuit; wiring it into a shared circuit is a common cause of overloads and fire risk |
How do I know if my home needs a panel or service upgrade?
Common signs include breakers that trip regularly under normal loads, a panel that feels warm to the touch, lights that dim when an appliance kicks on, or a home that still has a 100-amp service and runs electric heat alongside modern appliances. If you are adding circuits for a generator, EV charger, or a significant renovation, we run a load calculation before the upgrade to make sure the new service is sized correctly for what your home actually demands.
What causes a breaker to trip over and over?
Repeated tripping usually means one of three things: the circuit is consistently overloaded, there is a short circuit somewhere in the wiring or a connected device, or the breaker itself has worn out and is no longer holding its rated load. If resetting the breaker makes it trip again immediately, stop resetting it. That pattern points to a fault that needs a proper diagnosis before the circuit is put back into service.
Is the electrical work permitted and inspected?
Work that requires a permit in Anchorage is pulled and inspected through the appropriate municipal process. Panel upgrades, new service entrances, and significant wiring projects fall into that category. We handle the permitting side so you do not have to track it down yourself, and the inspection creates a record that the work was done to code. That matters when you sell the home or file an insurance claim.
Same-Day Availability
Electrical problems rarely wait for a convenient time. We keep availability open for same-day calls so you are not left waiting when something stops working or a breaker will not hold.
How do I know if the wiring in my older home is safe?
Homes built before the 1970s may still have knob-and-tube or aluminum branch wiring, both of which carry risks that modern wiring does not. Signs of concern include warm outlets, buzzing or discolored switch plates, frequently tripping breakers, or an insurance company flagging the wiring during a policy review. An electrical safety inspection covers the panel, the circuits, the grounding, and the protection devices, and gives you a clear picture of where things stand.
What does EV charger installation involve?
A Level 2 charger requires a dedicated 240-volt circuit run from your panel to the charger location, whether that is in a garage or a covered outdoor spot. We check that the panel has the capacity to support the added load, run the circuit, and install the outlet or hardwired unit. We work with all vehicle types and charger brands. If the panel is already near capacity, we will let you know what a service upgrade would involve before we proceed.
How does backup generator installation work?
We handle the electrical side of the installation from start to finish. That includes the transfer switch, the wiring from the generator to the panel, and the final connection. An automatic transfer switch is the most practical option for most Anchorage homes because it takes over without any action on your part when utility power drops. We confirm the installation meets code before we leave, and we make sure you understand how the system operates.
Upfront Quotes With No Surprise Fees
We give you a clear price before any work begins and we stand behind it. Transparent pricing with no hidden fees on any wiring job is how we operate, whether it is a same-day repair or a full panel upgrade.
Do I need to be home when the electrician arrives?
Someone over 18 should be present for the visit. We need access to the panel and any areas where work is being done, and we review the estimate with you before anything starts. If your schedule is tight, let us know when you call. We run appointments every day from 5:30 AM to 10:30 PM, which gives us more flexibility than a standard daytime window.
How does pricing work, and will the estimate change once work begins?
We give you a clear price before any work starts and we stick to it. If something unexpected turns up once we are into the job, we tell you what we found and what it would cost to address before we proceed. There are no surprise line items on the invoice and nothing added at the end without your approval. Payment is due when the job is complete and you have had a chance to review the work.
Work Performed by Licensed Electricians
Every job we take on is handled by licensed electricians who know the code requirements for Anchorage and the Municipality. The work is done correctly the first time, and it is inspected when a permit is required.
When should I call an electrician instead of trying to fix it myself?
Swapping a burned-out bulb or resetting a tripped breaker is reasonable to try on your own. Anything that involves opening a panel, replacing wiring, adding a circuit, or working inside a wall is a job for a licensed electrician. Electrical faults can cause fires and serious injury, and work done without a permit can create problems when you sell the home or make an insurance claim. If you are not certain what you are dealing with, a call costs nothing and gets you a straight answer.
What do flickering or dimming lights usually mean?
Occasional flicker when a large appliance starts up can be normal if the circuit is shared. Persistent flickering, dimming across multiple rooms, or lights that flicker with no obvious cause are worth investigating. Those patterns can point to a loose connection, a failing breaker, an overloaded circuit, or in some cases a problem at the service entrance. We start at the panel and trace the issue before recommending anything.
Can you add circuits for a workshop, chest freezer, or other high-draw equipment?
Yes. A dedicated circuit sized for the equipment's actual load is the right way to handle any appliance or tool that draws significant power. Running a welder, a large compressor, or a chest freezer on a shared circuit causes nuisance trips and can shorten the equipment's life. We run the circuit, confirm the panel can carry it, and make sure the outlet or connection is correctly rated for the load.
Call (907) 615-8798 and we will talk through what your home needs, give you an honest estimate, and get the work on the schedule.
(907) 615-8798