Decker Electric has been handling electrical repairs and installations for Anchorage homeowners, landlords, and small businesses since 2015. Whether you need a single outlet replaced or a full panel upgrade, we show up ready to work and get the job done right. We answer our own phones and show up in our own trucks. That means when you call, you reach someone who knows Anchorage, knows the work, and can get out to you fast. Same-day service. Upfront pricing. Licensed electricians.
We handle the full range of residential and commercial electrical work, from troubleshooting a tripping breaker to wiring a new garage. Every job we take on is built around the wiring done right the first time, so you are not calling us back for the same problem twice.
Most homeowners can't tell a minor wiring issue from a serious one, and that uncertainty is exactly why it pays to call early. Dead outlets, flickering lights, breakers that trip repeatedly, burning smells near a panel or outlet, sparks when you plug something in - none of those are problems to put off. They are signs the wiring needs attention, and we have the tools and experience to find the source fast.
We troubleshoot and repair:
We also install and test GFCI and AFCI protection where code requires it or where older wiring leaves a home exposed. Arc-fault and ground-fault breakers are now standard in kitchens, bathrooms, bedrooms, and garages, and we handle those upgrades as part of a broader safety inspection or as a standalone job. If you have not had an electrical safety inspection recently, that is a good place to start. We will give you honest recommendations on repairs, never an upsell. Pick up the phone and we'll get rolling.
Whether it's a single outlet or a full panel upgrade, the panel is where everything starts. Older homes in the area often came with 100-amp service, which was adequate for the time but falls short under today's electrical loads. If your home runs electric heat, added appliances, or you are planning to add an EV charger or generator, a 200-amp upgrade is usually the right foundation.
We handle:
All panel work is permitted and code-compliant. We pull the permits, handle the inspection, and make sure the work meets current Alaska electrical code. A properly sized panel is also the foundation for any future work, whether that is adding dedicated appliance circuits, wiring a standby generator, or preparing for an EV charger. Reach out and we'll start at the panel.
Choosing the right electrical fix is easier than it sounds, especially when you have someone walking you through the options before any work begins. We install and replace outlets of all types: standard, GFCI, AFCI, weatherproof, outdoor, and garage-rated receptacles. We also install dimmer switches, smart switches, and specialty switch configurations for homes and commercial spaces.
On the lighting side, we handle:
Anchorage winters bring long stretches of darkness, and good outdoor lighting matters more here than in most places. Whether you want a brighter driveway, better security lighting at a rental property, or updated fixtures inside, we handle the wiring, grounding, and bonding for every installation. One call brings an electrician to your door.
Some homes need a full rewire. Others just need one outlet fixed. We handle both ends of the spectrum and everything in between. For older homes still running knob-and-tube wiring, we offer full replacement with modern wiring that meets current code. If your home has aluminum wiring, we assess the condition and perform the remediation work needed to bring it up to a safe standard.
We also wire home additions, finished basements, new garages, and new construction from the ground up. Dedicated circuits are a regular part of that work: dryers, ranges, refrigerators, dishwashers, and other major appliances each need their own circuit to run safely and efficiently. If you are adding a large appliance or upgrading an existing one, we run the circuit and confirm the panel has the capacity to support it. That same process applies when a new heating or cooling unit needs its own dedicated electrical supply, including the disconnect and any panel capacity work on the power side.
We offer transparent pricing with no hidden fees on any wiring job. You will know what the work costs before we start, and we will not add surprises at the end. One call brings an electrician to your door.
Alaska's winters put real pressure on electrical infrastructure. Sub-freezing temperatures, ice storms, and extended periods of high electrical demand mean that the systems in your home need to be sized, protected, and maintained for conditions that most of the country never sees. These three services come up again and again for Anchorage homeowners, and we have the experience to handle each one correctly.
When a winter storm knocks out power in Anchorage, it can stay out for days. A properly installed standby generator keeps the lights on and the heat running when the grid goes down. Our work on the electrical side covers the generator hookup, transfer switch installation, standby wiring, and load calculations to make sure the system can carry what your home actually needs. We also recommend pairing a new generator with whole-home surge protection, so when power is restored, your appliances and electronics are not hit with a damaging surge.
Anchorage's older housing stock was not built for today's electrical loads. Electric heating, additional circuits, garage block-heater outlets, and modern appliances all add up. A 200-amp panel upgrade gives your home the capacity to handle those demands safely. We also install subpanels for garages and outbuildings, perform load calculations, and handle service-entrance and meter upgrades when the utility requires them. If you are adding a generator or planning for an EV charger, the panel is the first place we look.
Frozen pipes and roof ice dams are a real risk during Anchorage winters, and heat tape is one of the most effective ways to manage that risk. The electrical work involved is more involved than most homeowners expect. We run a dedicated circuit to the area being protected, install a GFCI outlet or weatherproof receptacle as required, and make sure the grounding and bonding are done correctly. Heat tape draws a steady load, and the circuit needs to be sized and protected to handle that load safely over a long winter season.
When the job is done, we leave your home clean and powered, whether that is a single-family house, a rental unit, or a small commercial space. We work with landlords and property managers across Anchorage Municipality on everything from routine outlet replacements to full electrical upgrades in multi-unit buildings. For small businesses, we handle office wiring, retail fixture installation, and warehouse electrical work.
Commercial clients often come to us for code violation repairs and permit work. If a property has failed an inspection or needs electrical updates before a sale or tenant move-in, we assess the situation and handle the corrections. We also do pre-purchase electrical inspections for buyers who want a clear picture of what they are getting into before closing. Permitted electrical work and proper documentation matter for landlords, business owners, and anyone managing a property in this area.
Whether it's a single outlet or a full panel upgrade, adding a Level 2 EV charger at home is one of the most practical electrical upgrades available right now. EV adoption is growing steadily in Alaska, and having a dedicated home charger is far more convenient than relying on public stations. We handle the full installation: dedicated circuit for the charger, panel capacity check, and the charger wiring itself. If the panel needs to be upgraded first, we handle that in the same visit when possible.
Whole-home surge protection is a smart addition to any home, and especially one that runs a generator or sits in an area prone to power fluctuations. A whole-home surge protector installs at the panel and shields your appliances, electronics, and wiring from voltage spikes caused by storms, utility switching, or generator startup. It is a straightforward installation with real long-term value for your equipment. One call brings an electrician to your door.
Calling an electrician for the first time can feel uncertain, especially when you are not sure what the problem is or what it will cost. We keep that process simple. When we arrive, we assess the situation, explain what we found, and give you a clear price before any work begins. No surprises at the end of the job, no pressure to approve work you did not ask for.
Our pricing is straightforward, and we stand behind the quality of the work. Electrical troubleshooting and diagnostics are part of every service call, and we take the time to explain what we found in plain language. If the repair is simple, we will tell you. If there is a larger issue that needs attention, we will walk you through the options honestly. Power restored. Code-compliant. Done right.
A transfer switch isolates your home's wiring from the utility line before your generator powers your circuits. Without one, a generator connected directly to your panel can back-feed power onto the utility line, which creates a serious hazard for utility workers and is a code violation. We install the transfer switch as part of every generator hookup so the system is safe, legal, and automatic when the power goes out.
Heat tape draws a continuous electrical load through the winter, which means it needs a dedicated circuit sized and protected for that specific use. We run the circuit from the panel to the area being protected, install a GFCI outlet or weatherproof receptacle as required by code, and verify the grounding and bonding before we leave. A properly installed circuit keeps the heat tape running safely without overloading the wiring or creating a fire hazard over a long Alaska winter.
We start with a load calculation to confirm the new panel is sized correctly for your home's actual electrical demand. From there we disconnect the old panel, install the new one, transfer and label the circuits, and verify grounding and bonding. All panel work is permitted, and we handle the inspection so the finished job meets current Alaska electrical code.
Any work that involves the breaker panel, new circuit wiring, or replacing outlets and switches in older homes with unknown wiring should be handled by a licensed electrician. DIY electrical work that is done incorrectly can create fire hazards and code violations that are expensive to correct later. If you are not certain what you are dealing with, a call to (907) 615-8798 is the safer and often faster path.
Yes. Adding GFCI protection to an ungrounded circuit is a code-accepted method for improving safety in older homes, and we do this regularly. We assess the existing wiring, install the correct outlet type, and verify that the protection is working before we leave. If the wiring itself is in poor condition, we will tell you what a more complete repair would involve.
A buzzing sound from a switch or outlet, a cover plate that is warm to the touch, visible discoloration or scorch marks, or a receptacle where plugs fit loosely are all signs that something is wrong. These symptoms often point to a loose connection or a failing device, both of which can become fire hazards if left alone. We diagnose and replace the device in a single visit in most cases.
Flickering or dimming lights can point to a loose connection at the fixture, a failing switch or dimmer, or a circuit that is being asked to carry more load than it was designed for. In some cases it points to a wiring problem deeper in the circuit or at the panel. We trace the fault to its source before recommending a fix, so you are not paying for a repair that does not address the real problem.
A quick repair addresses a specific failed component, like a bad outlet, a tripped breaker, or a loose connection. A full rewire replaces the branch-circuit wiring throughout the home, which is necessary when the existing wiring is knob-and-tube, deteriorated aluminum, or otherwise unsafe. We will tell you honestly which one your situation calls for after we assess the system.
A dead outlet that has no visible damage may simply be a tripped GFCI on the same circuit, which is an easy fix. A warm or discolored outlet is a more serious sign of a loose connection or overloaded wiring and should not be used until it is inspected. We check the outlet, the wiring behind it, and the circuit it sits on before replacing anything.
Yes. For work that requires a permit under Alaska electrical code, we pull the permit, schedule the inspection, and make sure the job passes before we consider it complete. Permitted work protects you as a homeowner and is required documentation for insurance claims, property sales, and rental compliance. We do not skip that step.
Decker Electric is locally owned and has been serving Anchorage since 2015. We handle everything from a single outlet to a full electrical service upgrade, and we do it with work performed by licensed electricians who know what they are doing. Call (907) 615-8798 for a quote or to schedule a service call. One call. One electrician. One fair price.
From a tripped breaker to a full panel upgrade, we handle the electrical work that keeps Anchorage homes and businesses running safely through every season. The table below covers the services we offer most often, who each one is best suited for, and a practical note to help you decide what to schedule first. If you have questions about a specific job, call us and we will talk it through.
| Service Type | What the Job Involves | When You Need It | Worth Knowing |
|---|---|---|---|
| Breaker & Fuse Repair | breaker replacement, fuse panel service, circuit reset diagnosis, overload assessment | Homes where a breaker trips repeatedly or will not hold a reset | A breaker that trips again immediately after reset usually signals a wiring fault, not just an overload |
| Electrical Panel & Service Upgrades | 200-amp service upgrade, panel replacement, subpanel installation, load calculation | Homes with electric heat loads, older 100-amp panels, or any property adding significant new circuits | A load calculation before the upgrade confirms the new service is correctly sized for the home's actual demand |
| Dedicated Appliance Circuits | dryer and range circuits, refrigerator and freezer circuits, workshop circuit installation | Anyone adding a high-draw appliance that needs its own protected circuit | Running a dryer or large appliance on a shared circuit causes nuisance trips and can shorten the appliance's life |
| Electrical Safety Inspections | panel and wiring inspection, AFCI and GFCI testing, grounding and bonding check, pre-sale or pre-purchase review | Home buyers, sellers, and anyone who has not had the electrical system reviewed in several years | An inspection gives you a clear picture of what is safe, what is marginal, and what needs attention before it becomes urgent |
| Ceiling Fan Installation | fan mounting and wiring, new ceiling box installation, fan switch or remote setup | Homeowners adding a fan to a new room or replacing an older unit | Older boxes may not be rated for fan weight; we check and replace the box when needed |
| Garage & Block-Heater Circuits | block heater outlet installation, dedicated garage circuits, weatherproof outlet wiring | Anchorage vehicle owners who need reliable plug-in access through winter | Block heater outlets are a practical necessity here; a dedicated circuit prevents nuisance trips on cold mornings |
| Outlet & Switch Installation | standard outlet replacement, GFCI outlet installation, USB outlets, dimmer and switch upgrades | Homeowners, landlords, and property managers keeping units code-compliant and functional | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor locations |
| Electrical Repairs & Troubleshooting | flickering lights, dead outlets, tripping breakers, circuit fault diagnosis | Any homeowner or tenant dealing with an unexplained electrical problem | Most common faults are resolved in a single visit once the source is correctly identified |
| Lighting Installation | recessed and LED lighting, security and motion lights, outdoor fixture wiring, under-cabinet lighting | Homeowners upgrading interior lighting or adding outdoor security lighting for Alaska's long dark winters | Outdoor fixtures in this climate must be weatherproofed and properly sealed against moisture and cold |
| Whole-Home Surge Protection | panel-level surge protector installation, whole-home electronics protection | Homes with high-value appliances, electronics, or sensitive equipment vulnerable to voltage spikes | A panel-mounted protector guards every circuit in the home, not just the outlets with power strips plugged in |
| Backup Generator Installation | transfer switch installation, generator wiring, panel connection, standby and portable hookups | Anchorage homeowners who need heat, lights, and essential circuits to stay on during winter outages | An automatic transfer switch takes over without any action on your part when utility power drops |
| Wiring & Rewiring | whole-home rewiring, knob-and-tube replacement, aluminum wiring remediation, addition and basement wiring | Older homes with outdated or unsafe wiring that limits what can safely be added to the system | Knob-and-tube and aluminum branch wiring carry real safety risks and often affect homeowner insurance coverage |
| Heat Tape Installation | dedicated circuit for heat tape, safe panel connection, roof and pipe heat tape wiring | Homeowners preventing frozen pipes or roof ice dams through Alaska's sub-freezing winters | Heat tape requires its own dedicated circuit; wiring it into a shared circuit is a common cause of overloads and fire risk |
How do I know if my home needs a panel or service upgrade?
Common signs include breakers that trip regularly under normal loads, a panel that feels warm to the touch, lights that dim when an appliance kicks on, or a home that still has a 100-amp service and runs electric heat alongside modern appliances. If you are adding circuits for a generator, EV charger, or a significant renovation, we run a load calculation before the upgrade to make sure the new service is sized correctly for what your home actually demands.
What causes a breaker to trip over and over?
Repeated tripping usually means one of three things: the circuit is consistently overloaded, there is a short circuit somewhere in the wiring or a connected device, or the breaker itself has worn out and is no longer holding its rated load. If resetting the breaker makes it trip again immediately, stop resetting it. That pattern points to a fault that needs a proper diagnosis before the circuit is put back into service.
Is the electrical work permitted and inspected?
Work that requires a permit in Anchorage is pulled and inspected through the appropriate municipal process. Panel upgrades, new service entrances, and significant wiring projects fall into that category. We handle the permitting side so you do not have to track it down yourself, and the inspection creates a record that the work was done to code. That matters when you sell the home or file an insurance claim.
Same-Day Availability
Electrical problems rarely wait for a convenient time. We keep availability open for same-day calls so you are not left waiting when something stops working or a breaker will not hold.
How do I know if the wiring in my older home is safe?
Homes built before the 1970s may still have knob-and-tube or aluminum branch wiring, both of which carry risks that modern wiring does not. Signs of concern include warm outlets, buzzing or discolored switch plates, frequently tripping breakers, or an insurance company flagging the wiring during a policy review. An electrical safety inspection covers the panel, the circuits, the grounding, and the protection devices, and gives you a clear picture of where things stand.
What does EV charger installation involve?
A Level 2 charger requires a dedicated 240-volt circuit run from your panel to the charger location, whether that is in a garage or a covered outdoor spot. We check that the panel has the capacity to support the added load, run the circuit, and install the outlet or hardwired unit. We work with all vehicle types and charger brands. If the panel is already near capacity, we will let you know what a service upgrade would involve before we proceed.
How does backup generator installation work?
We handle the electrical side of the installation from start to finish. That includes the transfer switch, the wiring from the generator to the panel, and the final connection. An automatic transfer switch is the most practical option for most Anchorage homes because it takes over without any action on your part when utility power drops. We confirm the installation meets code before we leave, and we make sure you understand how the system operates.
Upfront Quotes With No Surprise Fees
We give you a clear price before any work begins and we stand behind it. Transparent pricing with no hidden fees on any wiring job is how we operate, whether it is a same-day repair or a full panel upgrade.
Do I need to be home when the electrician arrives?
Someone over 18 should be present for the visit. We need access to the panel and any areas where work is being done, and we review the estimate with you before anything starts. If your schedule is tight, let us know when you call. We run appointments every day from 5:30 AM to 10:30 PM, which gives us more flexibility than a standard daytime window.
How does pricing work, and will the estimate change once work begins?
We give you a clear price before any work starts and we stick to it. If something unexpected turns up once we are into the job, we tell you what we found and what it would cost to address before we proceed. There are no surprise line items on the invoice and nothing added at the end without your approval. Payment is due when the job is complete and you have had a chance to review the work.
Work Performed by Licensed Electricians
Every job we take on is handled by licensed electricians who know the code requirements for Anchorage and the Municipality. The work is done correctly the first time, and it is inspected when a permit is required.
When should I call an electrician instead of trying to fix it myself?
Swapping a burned-out bulb or resetting a tripped breaker is reasonable to try on your own. Anything that involves opening a panel, replacing wiring, adding a circuit, or working inside a wall is a job for a licensed electrician. Electrical faults can cause fires and serious injury, and work done without a permit can create problems when you sell the home or make an insurance claim. If you are not certain what you are dealing with, a call costs nothing and gets you a straight answer.
What do flickering or dimming lights usually mean?
Occasional flicker when a large appliance starts up can be normal if the circuit is shared. Persistent flickering, dimming across multiple rooms, or lights that flicker with no obvious cause are worth investigating. Those patterns can point to a loose connection, a failing breaker, an overloaded circuit, or in some cases a problem at the service entrance. We start at the panel and trace the issue before recommending anything.
Can you add circuits for a workshop, chest freezer, or other high-draw equipment?
Yes. A dedicated circuit sized for the equipment's actual load is the right way to handle any appliance or tool that draws significant power. Running a welder, a large compressor, or a chest freezer on a shared circuit causes nuisance trips and can shorten the equipment's life. We run the circuit, confirm the panel can carry it, and make sure the outlet or connection is correctly rated for the load.
Call (907) 615-8798 and we will talk through what your home needs, give you an honest estimate, and get the work on the schedule.
(907) 615-8798